第1篇 工程師engineer崗位職責

nvh engineer 聲學工程師 曼胡默爾 曼胡默爾濾清器(上海)有限公司,曼胡默爾,曼胡默爾上海,曼胡默爾濾清器,曼胡默爾 job responsibility:

? gt-power simulation for snorkel noise, transmission loss, noise reduction, etc.

? virtual. lab (sysnoise) simulation for 3d acoustic performance, i.e. transmission loss, noise reduction, radiation noise, etc.

? fea simulation for dynamic stiffness, resonance, vibration, modal, etc.

? define nvh test plan acc. to customer sor/requirement.

? organize nvh resource internally and externally (nvh simulation and testing facility, etc) to support quotation and product development.

? acoustic tuning for intake system on dyno in acoustic room or test in test field, to control snorkel noise, radiation noise, insertion loss, etc.

? structure modal test, dynamic stiffness test, sound intensity test, sound power test, sound source identification, sound and vibration signal analysis, etc.

? create professional simulation and acoustic tuning report.

? discussion with product engineer for idea exchange to establish cad model, discussion with customer about simulation results.

? support for new idea validation from product & design engineers.

? support for quality issue, trouble shooting and solution searching

job description

job description prepared by/date:

job description updated by/date:

job description approved by:

education qualification

master degree or above, major in vehicle & engine, mechanics and mechanical engineer, acoustic engineering.

no. of years of experience

0-2 years, and special with talent, excellent master or phd can be considered as well.

professional exposure

(technical skills)

3d & 1d acoustic simulation,

acoustic & vibration fundamental,

digital signal process,

acoustic devices knowledge (sound source, microphone, acceleration transducer, hammer, etc),

familiar with engine and vehicle testing

preferred previous experiences

plastic component development experience

programming background, such as matlab, c++

work experience in oem or tier 1 supplier is preferred

functional skills

be good at ms-office software and presentation skill

basic vehicle structure knowledge under hood

behavioural skills

good communication skill, good team work

good hand work ability

ability to work under pressure

fluent in english

special knowledge/skills required

familiar with gt-power, lms. virtual lab, abaqus. muller-bbm,

any others

driving license c1

willingness to travelling and testing in customer

第2篇 seniordesignengineer高級電源設計工程師崗位職責職位要求

職責描述：

requirement:

1. bachelor degree in engineering ，electronics，or equivalent;

2. 10 years design working experience in related field / applicants in power supplies，driver or a similar company;

3. solid skills in analogue power/driver electronics design;

4. solid electronic component knowledge;

5. familiar with process design， line setup， process improvement， doe， fmea， autocad， solidwork， microsoft office

6. must be able to read， write and communicate in english (minimum passed cet level 4).

7.good problem solving skill，positive and aggressive.

job responsibility

1.product design and management until the time it goes to mass production;

2.technical support and transitioning new product platforms from erp-us d2&d team to production;

3.production and sales technical support for any sample request or product inquiry;

4. perform detailed electrical & magnetics design and cost analysis of each project to meet product requirement and cost;

5. perform detailed root cause and failure analysis within a short period of time;

6. provide solution to electromagnetic compatibility， electro magnetic interference， acoustic， dimming and safety requirement;

7. design and develop high efficient and high power density led power supply from prototype to production;

8. perform detailed test and verification to ensure product compliance versus the requirement;

9. provide detailed information to pcb and mechanical engineer to come up with the right solution for layout and overall product packaging;

10. other duties assigned by the rd management.

崗位要求：

學歷要求：本科

語言要求：不限

年齡要求：不限

工作年限：5-10年

第3篇 產品工程師engineer崗位職責

職責描述:

design & development

? lead and manage the customer negotiations regarding the specifications of the products to be designed and define the functional specifications based on the customer requirements, participate in the presentations for the developed products to the customer

? manage the development of the design concepts for the products (3d models, tolerance calculations, etc.)

? manage and perform the `functional reviews` at certain stages during the projects (fmea, design concept release, cad concept etc.) in cooperation with the manager r&d, manage the process of the functional product release of the products within the area of responsibility.

? patent check before gate, ensure that the patent rights for new/existing products are protected in cooperation with the legal department

? prepare and maintain the technical documentation regarding the products within the relevant product group

? coordinate all engineering activities with the production department in order to ensure the productbility of the designed products

? manage the processes of product modification in regards to the technical specifications during the serial production

? manage technical communication with prototype suppliers, i.e. material, durability, process, etc.

project management

? manage one or more projects under the lead of project manager and the manager r&d

? coordinate all required engineering activities within a project (concept development, design, simulation, acoustics and validation)

? establish the project plan regarding all required engineering activities within a project

? coordinate and support all activities within the project team to ensure that all required tasks are performed and all deadlines/quality gates are met

? plan, manage and control the engineering budget in the project; initiate and steer corrective actions in case of deviations

? define and manage the necessary internal and external resources for the projects within the product group to ensure efficiency during all project stages

? ensure compliance with the technical standards, processes and norms of m+h group during the project in cooperation with the director/manager r&d

? play the role as lpe to manage domestic development projects or local lpe for global projects.

validation

? define dv/pv test plan acc. to customer sor/requirement. design of experiment for trouble shooting and problem solving.

? define simulation & nvh plan acc. to customer sor/requirement. understand simulation & nvh report/results and accordingly guide designer for optimization.

? participate in the development and implementation of the testing equipment, tools and methods in accordance with the customer specifications

others

? coordinate the engineering activities with the other m+h departments and other m+h locations local, regional and global

? participate in/support the development and implementation of the innovation projects within the business unit

? provide support for fairs, tech shows and exhibitions to ensure that the m+h brand is promoted and new customers are attracted

第4篇 應用工程師applicationengineer崗位職責職位要求

職責描述：

本科學歷

bachelor degree

1年汽車行業工作經驗。機械背景。有橡膠行業工作經驗者優先

1 years experience in automotive industry. mechanical skills. experience in the rubber industry is a plus

英語或法語流利

fluent in english or french1.客戶需求確認，零件設計，有限元分析

customer requirements clarification， design of parts， fea

2.領導項目進度

lead the project development

3.負責一切相關產品決策和疑問解答

to be the product referent

4.協調歐洲母公司和hirp之間的信息交流

to coordinate the information from europe mother companies and hirp

5. 跟蹤哈金森研發系統，從報價請求到客戶批準進行批量生產

to follow the hutchinson development system (hds) from rfq (request for quotation) to psw (the approval of the customer to go into serial production) approval

崗位要求：

學歷要求：本科

語言要求：不限

年齡要求：不限

工作年限：1年經驗

第5篇 qcengineer/qc工程師崗位職責職位要求

職責描述：

實施生產、生產效率、質量和客戶服務標準；識別和解決問題，完成審核；實施系統改進；

·滿足質量控制財務目標估計的要求；

·制定質量控制計劃；確定關鍵控制點及預防措施；建立關鍵限值；監控程序；實施糾正措施；

·驗證質量流程，通過建立產品規格；產品測試；編寫和更新質量控制程序。

·準備質量文件：包括產品趨勢，過程，穩定性研究，糾正和重新驗證。

·維護和完成的產品，公司，制度，提高產品質量，以及合規性審計；調查客戶投訴；與管理層的其他成員合作開發新產品和工程設計、制造及訓練方法。

崗位要求：

學歷要求：大專

語言要求：不限

年齡要求：不限

工作年限：無工作經驗

第6篇 mechanicalengineer機械工程師崗位職責職位要求

職責描述：

knowledge and skill

1) about 2 years design working experience in mechanical field;

2) skills in mechanical drawing generating， including plastic part， sheet-metal part， extrusion part， etc.

3) familiar with product tolerance analysis; familiar in process and product assembly engineering;

4) skillful with solidworks， autocad， microsoft office;

5) must be able to read， write and communicate in english (minimum passed cet level 4);

job responsibility

1. drawing generating including 2d engineering drawing， assembly drawing， package drawing， etc.;

2. product/part testing for verification in deferent development phase;

3. other mechanical design related duties assigned by the rd management;

崗位要求：

學歷要求：本科

語言要求：不限

年齡要求：不限

工作年限：2年經驗

第7篇 documentcontrolengineer/文控工程師崗位職責職位要求

職責描述：

1. responsible for the checking and control of artwork documents for product.

負責產品包材印刷文件的文件審查和管理工作；

2. assistant hq to prepare the artwork of product;

協助總部準備產品的包材印刷文件；

3. review and collate the artwork after receiving it from hq and feedback the variance to hq for revising;

負責檢查和校對收到的文件并將任何偏差反饋總部以便更改；

4. ensure to distribute all the artwork and requirements which has been finished and confirm to factory timely;

確保包材印刷文件及時準確分發到各個工廠；

5. collect any nonconformity of artwork from factory and feedback to hq for revising;

匯總工廠反饋的不符合信息，及時反饋總部進行更改；

6. ensure archiving all the artwork document timely;

確保將所有確認好的包材印刷文件歸檔保存；

7. others as assigned by department head.

其他領導安排的工作。

職位要求：

1.bachelor degree or above. more than 2 years experience relate to document making and controlling preferred.

本科及以上學歷；2年以上文件制作、文件管理相關工作經驗等；

2. excellent working knowledge of microsoft software packages

熟練應用辦公軟件；

3. good teamwork and cooperation

有良好的團隊合作精神和協調能力

4. high anti-pressure ability， suitable for ot

有較強的抗壓能力，并能適應加班要求；

5. good communication skills in english both written and reading；

良好的英文讀寫能力；

崗位要求：

學歷要求：本科

語言要求：不限

年齡要求：不限

工作年限：2年經驗

第8篇 過程質量工程師/processqualityengineer崗位職責職位要求

職責描述：

position responsibility崗位職責

1.establish testing procedures for all production manufacturing processes， include process quality inspection and control document;

建立產品生產線過程檢驗程序，包括過程質量方面的檢驗和控制文件；

2.be responsible for daily production quality management， deal with suspicious products timely， collect process data and inspection record report on a regular basis;

3.be responsible for maintenance and testing of product inspection tools;

負責產品檢具的維護和驗證；

4.responsible for all calibration and maintenance of the company gauges and instruments;

負責公司所有量具和儀器的計量校準維護工作；

5.improves process quality competitiveness and customer satisfaction by driving continuous improvement activities;

通過推動持續改進，提高質量制程的競爭力和客戶滿意度；

6.handle customer quality complain and support of problem solving;

處理客戶質量投訴，并支持解決問題；

7.participate the new employee skill training;

8.assist in the generation and maintenance of complete quality systems;

對完善質量體系提供幫助；

position requirements職位要求

1.bsme， bsee degree or equivalent ;

機械或電氣專業本科；

2.experience minimum 3 years work experience in high volume manufacturing environment in a quality assurance function 2 - 3 years spc experience;

三年以上大規模生產企業質量管理經驗，兩至三年spc使用經驗；

3.quality management knowledge (iso9000 system， control plan， fmea， spc， msa， ppap， customer specific system request， etc.）;

質量管理知識(iso9000， 控制計劃，fmea， spc， msa， ppap， 客戶指定系統需求等)；

4.ability to communicate in english well both in verbal and written form good analytical skills ;

可以使用英語進行口頭和書面交流；

5. computer software to include， microsoft word， excel， powerpoint and microsoft project ;

使用軟件包括microsoft word， excel， powerpoint and microsoft project；

6.various quality tools and measuring devices;

良好的分析能力，可以使用各種質量工具和測量設備；

7.expected to work extended hours if required; 如有需要可以加班；

崗位要求：

學歷要求：本科

語言要求：不限

年齡要求：不限

工作年限：3-4年經驗

第9篇 lcd engineer、手機 lcd 工程師崗位職責范本

1.對lcm及camera樣品的確認。

2.lcm及camera相關問題的機解決和跟蹤。

3.配合各項目組,保證lcd和camera滿足項目進度要求。

4.對新產品lcd/camera的可行性評估。

第10篇 機械設計工程師mechanicalengineer崗位職責職位要求

職責描述：

requirements:

1. college degree or above in mechanical/ electrical engineering;

2. 3 years working experience related in mechanical development;

3. experience in electronics products and familiar with small mechanical parts like metal and plastics;

4. experience in part qualification flow. familiar with packaging design (carton box);

5. skillful in using solid works， auto cad; familiar with ms office;

6. good english in both spoken and written;

7. be responsible and hard work， good team player;

8. experience in led driver is preferred.

job responsibilities:

1. generates 2d drawings， part samples check(ppap)， product verification and analysis.

2. package design;

3. product design as needed;

4. prepare technical approval reports and other assigned job.

崗位要求：

學歷要求：本科

語言要求：不限

年齡要求：不限

工作年限：3-5年

第11篇 safety sw engineer 功能安全軟件開發工程師職位描述與崗位職責任職要求

職位描述：

responsibilities:

review & clarify safety software requirements/solution

implement safety software according to coding guideline and iso26262 standard

implement and execute automatic unit tests and static code analysis

integrate software components

prepare relevant documentation

calibrate software to vehicle and electric motor

contribute to safety software integration tests， verify safety software functionality

requirements:

bachelor degree or above in electronic engineering or similar

3 years experience or more in embedded sw development

proficiency in c programming language

proficiency in debugging and testing embedded software

basic understanding of motor control and e-drive system

understand iso26262， experience in functional safety would be a plus.

familiar with autosar sw architecture

familiar with matlab/simulink preferred

good english communication skills

第12篇 seniordesignengineer/高級設計工程師崗位職責職位要求

職責描述：

1.design and develop new heating and fan products according to market requirements. design improvements to existing products. 按市場部要求設計開發加熱器和風扇的新產品，改進現有老產品。

design and develop new products per requests prepared by product management， work with sales， purchasing， quality， operations and finance to release products that meet customer expectations， performance criteria and cost target.按照市場要求設計滿足客戶需要的性能，標準和目標價格的產品。

2.modify existing designs to match specific customer requirements.改進現有產品，滿足客戶要求。

customize/modify exisitng products to meet specific customer requirements， process engineering change orders (eco's) for product updates， upgrades， continuous improvements or corrections.定做或者修改，改進現有的產品，滿足客戶要求。

3. reverse engineering products and components.測繪樣品制作產品圖

reverse engineering products and components: decompose， measure， document and create components，assemblies and finished products; configure bills of materials (bom's) in erp system as well as 3d models and 2d drawings in cad system.設計三維和二維圖紙并制定材料明細清單。

4. improve or modify products.改進或者修改產品

initiate product improvement ideas， document and submit for approval.提交改進現有產品改進方案。

5.technical support to relevant depts with product technology.

provide technical product support to sales， purchasing， quality， operations as well as external customers.給相關部門提供產品的技術支持。

6.solve the technical problems in production line with others.和其他部門一起解決生產線上遇到的問題

evaluate engineering change requests submitted by operations， resolve assembly， test and performance problems by processing engineering change orders（ecr） as required.評估工程變更，發放ecr 文件。

7.analysize quality issues with other team members.和其他部門一起分析質量問題。

evaluate deviation requests submitted by quality and determine disposition of affected components/assemblies.不良品的處置。

職位要求：

1.bachelors degree in mechanical engineering.學士學位，機械或相關專業

bachelor degree in mechanical engineering with major in thermodynamics or mechanical design.熱力學或者機械專業本科以上畢業。

2.minimum 5 years of experience in mechanical design in related industry.至少五年本行業工作經驗

minimum 5 years of experience in high-volume manufacturing environment producing commercial and /or industrial goods for liquid and gas fueled heaters， appliances and/or cookware.五年大批量工業產品經驗。

3.liquid and gas fueled heater design experience required.有燃油或者燃?xì)馊∨鹘?jīng)驗。

4.auto cad，3d software（pro-e， or soldworks.etc）熟練使用auto cad 和某種3d軟件

proficient in cad 3d modeling and 2d drafting preferably using solidworks 2016 (autodesk inventor also considered)

5.experience in erp system， bom configuration and data entry， kingdee preferred，working knowledge of microsoft office (excel， words， outlook， powerpoint) and english language.電腦操作、英語熟練

崗位要求：

學歷要求：本科

語言要求：不限

年齡要求：不限

工作年限：無工作經驗

第13篇 seniorautomationengineer資深自動化工程師崗位職責職位要求

職責描述：

職位要求qualifications and skills needed to perform this job

1. 5 years above experiences in automation design 。 具有5年以上自動化設計經驗。

2. mechanical design knowledge and skills。 具有機械設計的專業知識和技巧。

3. good communication skill and ability to work with teams with good consulting， coaching and facilitation skills in a technical environment 。 良好的溝通能力和團隊協作能力，在技術層面上具備咨詢，指導和促進的能力。

4. skills in software including solidworks/pro-e and ms office。能熟練運用畫圖軟件solidworks、pro-e 和辦公軟件ms office。

5. good organization and project management skill。具有良好的項目組織管理能力。

職位職責key responsibilities

1. mechanical design 機械設計

understand the machine mechanical structure and build the competence for copy， modify and design automation machine mechanical structure. 了解機械結構原理并有能力拷貝，修改，設計自動化機械。

2. project tracking 項目跟蹤

as project leader， lead， direct， evaluate， and develop a team of project to ensure that the project is implemented effectively， consistently， and according to established guidelines and budgets.

review and analyse the data and information to identify trends and risks in the project. 作為項目負責人，領導、直接評估和發展一個團隊項目，確保項目的有效實施，持續，根據建立指導方針和預算，審查和分析數據，評估風險。

3. design for automation 自動化設計

review all process with platform concepts and make sure its implementation in an effective and efficient way。審查所有生產平臺，并確保其同過自動化實現有效和高效的運行

4. automation lead for production領導生產實現自動化

lead product family related work- such as automation platform solution， rfq(request for quotation)， dfm/dfa.支持和領導相關工作使生產部門實現自動化。

an attractive compensation and benefit will be offered！

崗位要求：

學歷要求：大專

語言要求：不限

年齡要求：不限

工作年限：5-7年經驗

第14篇 localizationengineer本地化工程師崗位職責職位要求

職責描述：

job descriptions（職責描述）:

prepare production files from a process and tools point of view

根據流程和工具要求準備生產文件

implement the delivery qa of localized products

對提交前的文件進行質量檢查

organize and implement software testing， compiling， bug fixing and bug reporting tasks

組織實施軟件的本地化測試、編譯，報告并解決錯誤

provide technical support to in-house team and external vendors

為內部和外部資源提供技術支持

plan for the use of automation wherever possible

適時地編寫和使用自動化程序

train new engineers into processes and applications

對新入職的工程師進行流程和應用軟件培訓

design and document localization tools

編寫和設計本地化工具的培訓文檔

qualifications（職位要求）:

bachelor's degree in computer science or equivalent

計算機或相關專業本科以上學歷

at least 2 years of engineering experience in a localization industry

兩年以上本地化工程經驗

good knowledge of cat tools， locstudio， catalyst， trados etc.

精通 locstudio， catalyst 和 trados 等常用的計算機輔助翻譯工具

extensive knowledge of software development and capable of programming in at least one language: c#， vb， java， perl

熟悉軟件開發流程，并至少能使用一種編程語言：c#， vb， java， perl

good command of english or japanese on reading and writing

良好的英文讀寫能力

familiar with microsoft， unix platforms and it infrastructure setup

熟悉 microsoft 和 unix、以及其他 it 基礎設施的搭建和配置

extra carefulness and patience on work style

工作態度嚴謹負責、細致耐心

self-starter & quick learner

做事主動，能快速學習并掌握新知識

崗位要求：

學歷要求：本科

語言要求：不限

年齡要求：不限

工作年限：1-3年